LED Body Sensor Light | Rechargeable Magnetic Motion Activated Night Light

This LED body sensor light turns on automatically when it detects movement in the dark. It is a rechargeable magnetic light that works in bedrooms, corridors, bathrooms, closets, and study rooms. No wiring or complicated installation is needed.

The light uses a built-in infrared sensor that detects motion within 3 to 5 meters and a 120 degree angle. When you walk by in a dark room, the light turns on and stays lit for about 25 seconds before turning off automatically. This saves energy and gives you light only when you need it.

This light is powered by a rechargeable battery. You charge it using a standard 5V USB cable. A red light shows it is charging, and a green light means it is fully charged. The light is not waterproof, so it should be used in dry indoor spaces.

Installation is simple with the included magnetic mount. Peel the adhesive on the back of the magnet and stick it to a wall, cabinet, or shelf. The light attaches to the magnet and can be removed easily for charging or repositioning. The light has three modes: constant on, motion sensor auto on/off, and off.

Key Features and Benefits

- Motion sensor that detects movement up to 5 meters away so the light turns on automatically in the dark

• Rechargeable battery that eliminates the need for disposable batteries or hardwiring

• Magnetic mounting system that allows you to attach and remove the light easily

• Three operating modes including constant light, motion activation, and off for flexible use

• Soft LED light that is gentle on eyes and provides comfortable illumination for night time

Who Is This For

- People who need hands-free lighting in dark hallways, stairs, or corridors at night

• Anyone looking for a rechargeable closet or wardrobe light that turns on when the door opens

• Parents who want a soft night light for a childs bedroom or bathroom without bright glare

• Renters or homeowners who want temporary lighting without drilling holes or running wires

Usage Scenario

Sarah gets up at night to get water for her toddler. Instead of turning on a bright overhead light that wakes everyone up, she installed this motion sensor light in the hallway and bathroom. When she walks past, the light turns on softly, guides her way, and turns off after she passes. She never has to fumble for a switch in the dark.

Micro Comparison

Unlike plug-in night lights that need to stay near an outlet, this light is cordless and can be placed anywhere. Compared to battery-operated lights that use disposable batteries, this one recharges via USB, saving money and reducing waste. The magnetic mount makes it easier to reposition than adhesive-only lights that lose stickiness over time.

Specifications

Material: ABS + PVC

Light Source: LED bulbs

Power Source: Rechargeable battery (included)

Input Voltage: 5V

Wattage: 1W

Luminous Flux: 249 to 2000 lumens

Sensor Range: 3 to 5 meters, angle up to 120 degrees

Auto-off Time: Approximately 25 seconds

Length: 50 cm / 19.7 in

Width: 1.2 cm / 0.5 in

Please allow 1-3 cm / 0.4-1.2 in difference due to manual measurement.

Package Includes

- 1 x LED motion sensor light

• 1 x Magnetic mounting plate

• 1 x Adhesive sticker

• 1 x USB charging cable

Why You Will Love It

You will love how this light makes dark spaces feel safe and easy to navigate. It saves you from searching for switches in the middle of the night. The rechargeable design means no batteries to buy, and the magnetic mount lets you move it wherever you need light most.

Questions and Answers

Question: How do I install this light without tools?

Answer: Peel the adhesive backing on the magnet and stick it to a clean, dry surface. The light then attaches to the magnet. No tools or drilling needed.

Question: How long does the battery last on a full charge?

Answer: Battery life depends on usage frequency. In sensor mode with normal night time use, it can last several days to a week before needing a recharge.

Question: Can I use this light in a bathroom or kitchen?

Answer: Yes, as long as it is not exposed to direct water or steam. The light is not waterproof, so avoid placing it in a shower or near a sink where it could get wet.

Question: Does the light stay on continuously or only when motion is detected?

Answer: It has three modes. In sensor mode, it turns on with motion and off after 25 seconds. In constant on mode, it stays lit until you switch it off. You choose the mode.

Question: Will the light work if the power goes out?

Answer: Yes. Since it is battery powered and rechargeable, it works during a power outage as long as it has charge. It can also be used as an emergency light.